Drillco

4550E Series Taper Pin Reamers

item code: 455E090

Website Under Construction. Please Call (905) 356-8151

One of our friendly customer service agents are here to help.

Taper Pin Reamers are manufactured with a taper of 1/4" per foot. They are used to ream holes into which standard taper pins will fit. The point of each reamer will enter hole reamed by the next smaller size. Hole to be reamed should be a few thousands smaller than the small diameter of the finished reamed hole. Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated.